XUbuntu 16.04 Mainline Linux 4.14.11 Preview Image 7

AntonyAntony
edited January 2018 in AML-S905X-CC

Hi @loverpi,
XUbuntu starts properly and prompt the login.
I cannot go further because the USB seems to not work. The keyboard is not working even the ver-num LED stay off.
My power supply is an official raspberry pi 2,5A
The same keyboard was working properly with Android images and Armbian (Armbian_5.34_Lepotato_Ubuntu_xenial_next_4.13.8_desktop).

Link of the img: https://www.kickstarter.com/projects/librecomputer/libre-computer-board-next-gen-4k-sbc-dev-board-for/posts/2085219

BR,
Antony

Share on Twitter Share on Google+ Share on Facebook

Comments

  • jeepthingjeepthing

    I have to unplug my wifi usb doggle 1st or can't type in login

    Share on Twitter Share on Google+ Share on Facebook
  • aw__aw__

    I'm finding this image to be pretty unusable. I only got video output to a Toshiba TV once, otherwise it gets no signal. USB wifi dongle works, but can't even get a basic mouse and keyboard recognized. USB and video both work fine on either the LibreElec or Lakka images. Still waiting on this board to be useful...

    Share on Twitter Share on Google+ Share on Facebook
  • loverpiloverpi
    edited January 2018

    Can you provide the output for "dmesg -w" when you plug in the device? and "dmesg | grep -i usb". Also specify exactly which devices you have plugged into which port. It helps us duplicate the issue.

    Share on Twitter Share on Google+ Share on Facebook
  • AntonyAntony

    I would like to help but I cannot type anything without a keyboard. I tried 4 different keyboards.
    Nothing at all is recognise on USB ports

    Share on Twitter Share on Google+ Share on Facebook
  • aw__aw__ 
    libre@libre-computer:~$ dmesg | grep -i usb                                     
[    1.404188] usbcore: registered new interface driver usbfs                   
[    1.404232] usbcore: registered new interface driver hub                     
[    1.404305] usbcore: registered new device driver usb                        
[    2.464792] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver       
[    2.492092] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver           
[    2.517263] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1                                                                          
[    2.539821] hub 1-0:1.0: USB hub found                                       
[    2.552436] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2                                                                          
[    2.560067] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.                                                                     
[    2.568462] hub 2-0:1.0: USB hub found                                       
[    2.579300] usbcore: registered new interface driver usb-storage             
[    2.659741] usbcore: registered new interface driver usbhid                  
[    2.659744] usbhid: USB HID core driver                                      
[    2.887119] usb 1-1: new high-speed USB device number 2 using xhci-hcd       
[    3.072632] hub 1-1:1.0: USB hub found

    plugin keyboard - top left port

    [  150.879166] usb 1-2: new low-speed USB device number 3 using xhci-hcd        
[  161.271170] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead                                                                       
[  161.273537] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up                   
[  161.279160] usb usb1-port2: couldn't allocate usb_device                     
[  161.246947] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.                                                                     
[  161.271170] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead                                                                       
[  161.273537] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up                   
[  161.279160] usb usb1-port2: couldn't allocate usb_device                     
[  161.284430] usb 1-1: USB disconnect, device number 2

    remove keyboard, no messages
    plugin keyboard to any port, no messages

    reboot

    plugin hp rollerball mouse - bottom left port

    [   38.554928] usb 1-1.1: new low-speed USB device number 3 using xhci-hcd      
[   38.701956] input: Logitech USB Mouse as /devices/platform/soc/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C001.0001/input/input1        
[   38.702138] hid-generic 0003:046D:C001.0001: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-xhci-hcd.0.auto-1.1/input0

    remove

    [  100.865526] usb 1-1.1: USB disconnect, device number 3

    re-plugin - top left port

    [  119.867230] usb 1-2: new low-speed USB device number 4 using xhci-hcd        
[  130.033588] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead                                                                       
[  130.035875] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up                   
[  130.041391] usb usb1-port2: couldn't allocate usb_device                    
[  130.014907] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.                                                                      
[  130.033584] xhci-hcd xhci-hcd.0.auto: Host halt failed, -110                 
[  130.033588] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead                                                                       
[  130.035875] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up                   
[  130.041391] usb usb1-port2: couldn't allocate usb_device                     
[  130.046664] usb 1-1: USB disconnect, device number 2

    all ports dead again

    reboot

    retry keyboard - bottom left port

    [   52.871127] usb 1-1.1: new low-speed USB device number 3 using xhci-hcd      
[   52.996137] input:   USB Multimedia Keyboard  as /devices/platform/soc/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:099A:610C.0001/input/input1
[   53.055402] hid-generic 0003:099A:610C.0001: input: USB HID v1.00 Keyboard [  USB Multimedia Keyboard ] on usb-xhci-hcd.0.auto-1.1/input0                    
[   53.059779] input:   USB Multimedia Keyboard  as /devices/platform/soc/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:099A:610C.0002/input/input2
[   53.119074] hid-generic 0003:099A:610C.0002: input: USB HID v1.00 Device [  USB Multimedia Keyboard ] on usb-xhci-hcd.0.auto-1.1/input1

    unplug

    [  110.337535] usb 1-1.1: USB disconnect, device number 3

    replug keyboard - bottom right port

    [  149.874967] usb 1-1.2: new low-speed USB device number 4 using xhci-hcd      
[  149.987727] input:   USB Multimedia Keyboard  as /devices/platform/soc/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.0/0003:099A:610C.0003/input/input3
[  150.047646] hid-generic 0003:099A:610C.0003: input: USB HID v1.00 Keyboard [  USB Multimedia Keyboard ] on usb-xhci-hcd.0.auto-1.2/input0                    
[  150.051421] input:   USB Multimedia Keyboard  as /devices/platform/soc/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:099A:610C.0004/input/input4
[  150.111068] hid-generic 0003:099A:610C.0004: input: USB HID v1.00 Device [  USB Multimedia Keyboard ] on usb-xhci-hcd.0.auto-1.2/input1

    unplug

    [] usb 1-1.2: USB disconnect, device number 4

    replug keyboard - top right port

    [] usb 1-1.3: new low-speed USB device number 5 using xhci-hcd      
[] input:   USB Multimedia Keyboard  as /devices/platform/soc/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:099A:610C.0005/input/input5
[] hid-generic 0003:099A:610C.0005: input: USB HID v1.00 Keyboard [  USB Multimedia Keyboard ] on usb-xhci-hcd.0.auto-1.3/input0                    
[] input:   USB Multimedia Keyboard  as /devices/platform/soc/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.3/1-1.3:1.1/0003:099A:610C.0006/input/input6
[] hid-generic 0003:099A:610C.0006: input: USB HID v1.00 Device [  USB Multimedia Keyboard ] on usb-xhci-hcd.0.auto-1.3/input1
<unplug>
[] usb 1-1.3: USB disconnect, device number 5

    replug keyboard - top left port

    [] usb 1-2: new low-speed USB device number 6 using xhci-hcd        
[] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead                                                                       
[] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up                   
[] usb usb1-port2: couldn't allocate usb_device                    
[] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.                                                                      
[] xhci-hcd xhci-hcd.0.auto: Host halt failed, -110                 
[] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead                                                                       
[] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up                   
[] usb usb1-port2: couldn't allocate usb_device                     
[] usb 1-1: USB disconnect, device number 2

    Conclusion: Top left (closest to Ethernet) port is unusable, I can use the other 3 simultaneously

    Any tips to get output on HDMI?

    (some timestamps removed to make char count)

    Share on Twitter Share on Google+ Share on Facebook
  • loverpiloverpi
    edited January 2018

    @aw__ That looks like an old bug that was fixed in preview release 3 or 4. Are you using the latest image?

    Share on Twitter Share on Google+ Share on Facebook
  • jeepthingjeepthing

    top left port was my wifi usb can't type login problem with image 7 , using the other 3
    it works

    Share on Twitter Share on Google+ Share on Facebook
  • aw__aw__ 
    libre@libre-computer:~$ cat /proc/version                                       
Linux version 4.14.11-g18ced7f2-dirty (root@dxue-thinkpad-x1-carbon) (gcc versio
n 6.3.1 20170404 (Linaro GCC 6.3-2017.05)) #7 SMP PREEMPT Sat Jan 6 00:30:53 EST 2018
    Share on Twitter Share on Google+ Share on Facebook
  • TitQuentinTitQuentin

    Hi all, I flash this .img with command line dd. I plug the µSd in AML S905X CC. For me : Ubuntu doesn't boot. I have a black screen with a line flashing on the top left in my screen.
    Thx for help.

    Share on Twitter Share on Google+ Share on Facebook
  • JolleyLamaJolleyLama

    Is it possible to upgrade from 4.14.7 to 4.14.11 via apt-get? I've tried update/upgrade/dist-upgrade. I see some packages get updated, but not the kernel. Is there some other set of commands to do an upgrade? Or do we need to burn the image to an SD card?

    Share on Twitter Share on Google+ Share on Facebook
Sign In or Register to comment.

© Vanilla Keystone Theme 2024