Armbian CPU Speed
Hello Guys
I have a ALL-H3-CC (Tritium) 1GB Board and need help to run the board
I have installed armbian jessie (Retrorangepi 4.2) and have issues
the board work with follow settings
armbianEnv.txt
verbosity=1
logo=disabled
console=both
disp_mode=1920x1080p60
overlay_prefix=sun8i-h3
overlays=usbhost1 usbhost2 analog-codec
rootdev=UUID=8f6a4987-3f69-4921-9b6f-7470dbd1b5a2
rootfstype=ext4
i can boot, the usb and eth function its okay
the problem is the board run only on 408Mhz on load and idle....
in the sun8i-h3-libretech-all-h3-cc.dts have iam found the opp-table up to 1368Mhz
what iam must set or load to work with fullspeed
please help me guys
Comments
I believe this is what ur looking for: https://docs.armbian.com/User-Guide_Fine-Tuning/#how-to-alter-cpu-frequency
The Governor is set to "GOVERNOR=ondemand" by default, but you can set it to "GOVERNOR=performance" or just make adjustments as you choose to the file.
Debian Wiki - Valid values: userspace conservative powersave ondemand performance
ALL-H3-CC H3 will work up to 1.2GHz. ALL-H3-CC H5 will work up to 1GHz but it is faster since Cortex-A53 is 30% faster than Cortex-A7 per clock.