Mainline u-boot image AML-S905X-CC

amoon

Hi All,

I have followed the instruction from the u-boot/board/amlogic/p212/README.libretech-cc

using following scripts.

But I could not get the final image u-boot.bin.sd.bin for AML-S905-CC libretech-cc board.

Please provide some inputs.

#!/bin/bash
set +x
git clone git://git.denx.de/u-boot.git u-boot-p212
cd u-boot-p212
git pull origin
export ARCH=arm
export CROSS_COMPILE=aarch64-linux-gnu-
make libretech-cc_defconfig
make

cd ..

wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH

git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot
cd amlogic-u-boot
make libretech_cc_defconfig
make

export FIPDIR=$PWD/fip

cd ../u-boot-p212

mkdir fip
cp -v $FIPDIR/gxl/bl2.bin fip/
cp -v $FIPDIR/gxl/acs.bin fip/
cp -v $FIPDIR/gxl/bl21.bin fip/
cp -v $FIPDIR/gxl/bl30.bin fip/
cp -v $FIPDIR/gxl/bl301.bin fip/
cp -v $FIPDIR/gxl/bl31.img fip/
cp -v u-boot.bin fip/bl33.bin

$FIPDIR/blx_fix.sh \
        fip/bl30.bin \
        fip/zero_tmp \
        fip/bl30_zero.bin \
        fip/bl301.bin \
        fip/bl301_zero.bin \
        fip/bl30_new.bin \
        bl30

$FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0

$FIPDIR/blx_fix.sh \
        fip/bl2_acs.bin \
        fip/zero_tmp \
        fip/bl2_zero.bin \
        fip/bl21.bin \
        fip/bl21_zero.bin \
        fip/bl2_new.bin \
        bl2

$FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
$FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
$FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
$FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
$FIPDIR/gxl/aml_encrypt_gxl --bootmk \
                --output fip/u-boot.bin \
                --bl2 fip/bl2.n.bin.sig \
                --bl30 fip/bl30_new.bin.enc \
                --bl31 fip/bl31.img.enc \
                --bl33 fip/bl33.bin.enc

amoon

Ok I figure out the issue.

After following the link https://github.com/BayLibre/u-boot/tree/readme 

Thanks.

Drv30

Does this allow for EmuELEC to be installed into emmc? Otherwise, how is this different from the emmc bootloader installer integrated into the Armbian distros? Will the folks at loverpiss be releasing a USB module by any chance?